Normal Operation when a SkyBell HD is first connected:
- LED Red = starting to power up (1st 10 min)
- LED Red/Blue = completing power up process for sync and normal operation (up to 30 minutes and this time will change to less than 7 min in the near future with over the air updates) New LED of a flicker or strobe red LED indicates really low power. If a customers HD stays in this mode they need to increase their power.
- LED solid Yellow = boot up mode (1 minute or less)
- Button Red/Green = ready to sync
Note: If the battery is super low on power it will blink only red first and then go to red/blue.