SkyBell HD Device Reset

SkyBell Device Reset

 

 

 

  • Soft Reset - Hold the SkyBell LED (main button) down for approximately 45 seconds. The SkyBell will rapidly blink green and then flash Red/Green. Have the customer continue holding the button until the pace of the LED flashes change. This is also known as a general power cycle.

 

  • Hard Reset - Hold the SkyBell LED (main button) down for approximately one (1) minute. The SkyBell will rapidly blink green and then blink Red/Green. Have the customer continue holding the button until the LED goes from rapidly blinking blue to rapidly blinking yellow. Now the customer can release the button. The LED will start to blink Red/Green and is now ready for re-syncing.
Have more questions? Submit a request
Powered by Zendesk